Biocidal Potential and Chemical Composition of Industrial Essential Oils from Hyssopus officinalis,Lavandula × intermedia var. Super,and Santolina chamaecyparissus

This work presents the biocidal (insecticidal, ixodicidal, nematicidal, and phytotoxic) effects and chemical compositions of three essential oils obtained from the industrial steam distillation (IEOs) of hyssop (Hyssopus officinalis L.), lavandin (Lavandula × intermedia or L. × hybrida var. Super ), and cotton lavender (Santolina chamaecyparissus L.). Their chemical composition analyzed by gas chromatography coupled to mass spectrometry showed 1,8‐cineole (53%) and β‐pinene (16%) as the major components of H. officinalis, linalyl acetate (38%) and linalool (29%) of L. × intermedia; and 1,8‐cineole (10%) and 8‐methylene‐3‐oxatricyclo[5.2.0.0^2,4]nonane (8%) in S. chamaecyparissus. The biocidal tests showed that L. × intermedia IEO was the most active against the insect Spodoptera littoralis and toxic to the tick Hyalomma lusitanicum, IEO of H. officinalis was strongly active against S. littoralis, and finally, S. chamaecyparissus IEO was a strong antifeedant against the aphid Rhopalosiphum padi, toxic to H. lusitanicum and with moderate effects against Leptinotarsa decemlineata, S. littoralis, and Lolium perenne.     

Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

From Life Cycle Assessment to Life Cycle Management

Life cycle assessment (LCA) is a widely accepted methodology to support decision‐making processes in which one compares alternatives, and that helps prevent shifting of environmental burdens along the value chain or among impact categories. According to regulation in the European Union (EU), the movement of waste needs to be reduced and, if unavoidable, the environmental gain from a specific waste treatment option requiring transport must be larger than the losses arising from transport. The EU explicitly recommends the use of LCA or life cycle thinking for the formulation of new waste management plans. In the last two revisions of the Industrial Waste Management Programme of Catalonia (PROGRIC), the use of a life cycle thinking approach to waste policy was mandated. In this article we explain the process developed to arrive at practical life cycle management (LCM) from what started as an LCA project. LCM principles we have labeled the “3/3” principle or the “good enough is best” principle were found to be essential to obtain simplified models that are easy to understand for legislators and industries, useful in waste management regulation, and, ultimately, feasible. In this article, we present the four models of options for the management of waste solvent to be addressed under Catalan industrial waste management regulation. All involved actors concluded that the models are sufficiently robust, are easy to apply, and accomplish the aim of limiting the transport of waste outside Catalonia, according to the principles of proximity and sufficiency.     

The Everyday Life Context of Increasing Energy Demands: Time Use Survey Data in a Decomposition Analysis

Industrial ecologists have modeled with precision the material foundations of industrial systems, but given less attention to the demand for products and the drivers of structural changes in these systems. This article suggests that time use data complement data on monetary expenditure and can be used to elucidate the everyday life context in which the changes in the economy take place. It builds upon the claim that goods are not direct sources of utility, but enter specific household activities as inputs. A second argument for the proposed approach is that it can be used to introduce and foster human agency in analyses of production systems. The article uses Finnish time use survey data, consumption expenditure data, and data on the sectoral energy intensities of financial output in the Finnish economy. First, a measure of the energy intensity of activities is derived by relating consumer time use and the required direct and indirect energy requirements. Second, the results include a decomposition of changes in the energy requirements of private consumption in Finland during the 1990s. It is shown that although the same activities on average require increasing energy inputs per unit of time, Finns have simultaneously changed the structure of their everyday life toward less energy-intensive activities.     

What Do We Know About Metal Recycling Rates?

The recycling of metals is widely viewed as a fruitful sustainability strategy, but little information is available on the degree to which recycling is actually taking place. This article provides an overview on the current knowledge of recycling rates for 60 metals. We propose various recycling metrics, discuss relevant aspects of recycling processes, and present current estimates on global end‐of‐life recycling rates (EOL‐RR; i.e., the percentage of a metal in discards that is actually recycled), recycled content (RC), and old scrap ratios (OSRs; i.e., the share of old scrap in the total scrap flow). Because of increases in metal use over time and long metal in‐use lifetimes, many RC values are low and will remain so for the foreseeable future. Because of relatively low efficiencies in the collection and processing of most discarded products, inherent limitations in recycling processes, and the fact that primary material is often relatively abundant and low‐cost (which thereby keeps down the price of scrap), many EOL‐RRs are very low: Only for 18 metals (silver, aluminum, gold, cobalt, chromium, copper, iron, manganese, niobium, nickel, lead, palladium, platinum, rhenium, rhodium, tin, titanium, and zinc) is the EOL‐RR above 50% at present. Only for niobium, lead, and ruthenium is the RC above 50%, although 16 metals are in the 25% to 50% range. Thirteen metals have an OSR greater than 50%. These estimates may be used in considerations of whether recycling efficiencies can be improved; which metric could best encourage improved effectiveness in recycling; and an improved understanding of the dependence of recycling on economics, technology, and other factors.     

Extended Producer Responsibility in Thailand

Waste electrical and electronic equipment (WEEE) sheds light on the dimmer side of production and consumption patterns in modern societies. The rapid increase in its quantity and complexity contribute to the challenges it poses to solid waste management systems. Several members of the Organisation for Economic Co‐operation and Development (OECD) have relied on the principle of extended producer responsibility (EPR) to tackle the issue, with varying degrees of success. Several non‐OECD countries, including Thailand, are now developing WEEE programs and are looking for lessons from these first movers. This case study aims to provide an understanding both of this context and of the EPR program for WEEE proposed for Thailand. It finds that EPR mechanisms in general, and the proposed buy‐back system financed by product fees in Thailand in particular, have a strong potential to consolidate WEEE collection for the formal recycling sector by offering end users monetary incentives. On the negative side, this is an expensive combination of policy instruments, and the institutional design of the governmental fund is rigid. The policy proposal also contains no mechanism for product redesign—one of the objectives in the national WEEE strategy. This article suggests that the effectiveness of the policy might benefit from more flexibility at the compliance scheme level, in order to lessen the monopoly of the governmental fund, as well as the introduction of differentiated fees to promote environmentally friendly products.     

When the Background Matters: Using Scenarios from Integrated Assessment Models in Prospective Life Cycle Assessment

Prospective life cycle assessment (LCA) needs to deal with the large epistemological uncertainty about the future to support more robust future environmental impact assessments of technologies. This study proposes a novel approach that systematically changes the background processes in a prospective LCA based on scenarios of an integrated assessment model (IAM), the IMAGE model. Consistent worldwide scenarios from IMAGE are evaluated in the life cycle inventory using ecoinvent v3.3. To test the approach, only the electricity sector was changed in a prospective LCA of an internal combustion engine vehicle (ICEV) and an electric vehicle (EV) using six baseline and mitigation climate scenarios until 2050. This case study shows that changes in the electricity background can be very important for the environmental impacts of EV. Also, the approach demonstrates that the relative environmental performance of EV and ICEV over time is more complex and multifaceted than previously assumed. Uncertainty due to future developments manifests in different impacts depending on the product (EV or ICEV), the impact category, and the scenario and year considered. More robust prospective LCAs can be achieved, particularly for emerging technologies, by expanding this approach to other economic sectors beyond electricity background changes and mobility applications as well as by including uncertainty and changes in foreground parameters. A more systematic and structured composition of future inventory databases driven by IAM scenarios helps to acknowledge epistemological uncertainty and to increase the temporal consistency of foreground and background systems in LCAs of emerging technologies.     

Intercompany Energy Integration

Reusing heat through process integration in heat exchanger networks has long been a key measure for increasing energy efficiency in energy‐intensive industries. Thermal pinch analysis is commonly used for a systematic matching of process streams and thus planning of optimal process integration in large chemical plants. The possible savings increase with the amount of heat and the number of integrated process streams. Therefore co‐ siting of several companies in a symbiotic network opens new opportunities for process integration even in small and medium‐size enterprises (SMEs), but also introduces new challenges. Thermal pinch analysis is extended here to account for piping distances and fluctuations and limited availability of energy flows by adding additional costs for the piping system and a backup utility system in the optimization function. Cooperative game theory is proposed to derive a sharing of savings between the partners of the industrial symbiosis that is optimal for each partner and should prevent partners from leaving the network because of higher benefits in a subgroup or alone. It is argued that knowledge about the optimality of a network for each partner creates trust between the partners that is a necessary base for the long‐term commitment needed in industrial symbioses. An exemplary symbiotic network combining the production of pulp and woody biomass energy carriers is used to illustrate the proposed approaches.     

A neutron activation technique for manganese measurements in humans

Manganese (Mn) is an essential element for humans, animals, and plants and is required for growth, development, and maintenance of health. Studies show that Mn metabolism is similar to that of iron, therefore, increased Mn levels in humans could interfere with the absorption of dietary iron leading to anemia. Also, excess exposure to Mn dust, leads to nervous system disorders similar to Parkinson's disease. Higher exposure to Mn is essentially related to industrial pollution. Thus, there is a benefit in developing a clean non-invasive technique for monitoring such increased levels of Mn in order to understand the risk of disease and development of appropriate treatments.To this end, the feasibility of Mn measurements with their minimum detection limits (MDL) has been reported earlier from the McMaster group. This work presents improvement to Mn assessment using an upgraded system and optimized times of irradiation and counting for induced gamma activity of Mn. The technique utilizes the high proton current Tandetron accelerator producing neutrons via the ⁷Li(p,n)⁷Be reaction at McMaster University and an array of nine NaI (Tl) detectors in a 4π geometry for delayed counting of gamma rays. The neutron irradiation of a set of phantoms was performed with protocols having different proton energy, current and time of irradiation. The improved MDLs estimated using the upgraded set up and constrained timings are reported as 0.67 μgMn/gCa for 2.3 MeV protons and 0.71 μgMn/gCa for 2.0 MeV protons. These are a factor of about 2.3 times better than previous measurements done at McMaster University using the in vivo set-up. Also, because of lower dose-equivalent and a relatively close MDL, the combination of: 2.0 MeV; 300 μA; 3 min protocol is recommended as compared to 2.3 MeV; 400 μA; 45 s protocol for further measurements of Mn in vivo.     

基于“无废理念”的纺织服装工业区绿色化改造模式研究

通过对中国工业区，特别是纺织服装工业区"产废"情况的梳理，明确针对污染严重，经济效益不高的工业区进行改造的必要性。为实现对纺织服装工业区绿色化改造，从"无废理念"出发，重点研究纺织服装工业区绿色化改造的可实施路径。在研究方法上将纺织服装工业区作为研究整体，基于可持续发展思想，构建纺织服装工业区经济、社会、环境复合生态系统，运用层次分析法，选取对于该类工业园区具有代表性的经济、社会、环境指标进行评价，通过评价后总的分值，结合生命周期规律，将需要改造的纺织服装工业区进行初步筛选。同时，利用经济、社会、环境各子系统的分值，对具体改造模式加以判别。文章通过对纺织服装工业区不可持续性的内涵挖掘，将工业区绿色化改造模式与改造内容建立关联，可以通过产业绿色化改造和建成空间绿色化改造，来实现工业园区的升级与转型，进而实现可持续发展。最后，根据模式判别结果，针对不同模式在产业与建成空间的不同特征，提出相应的绿色化改造方法和政策建议。在结论中总结基于"无废理念"纺织服装工业区绿色化改造与可持续发展的辩证关系。此方法适用于其他类型的工业区改造模式判别，以促进工业区的可持续发展。